Description WARRANTY The following components are warranted for four (4) years from the device’s date of manufacture: monitor, pump, and CO/H2S/O2/LEL sensors. All other components are warranted for two (2) years from the device’s date of manufacture.** CASE MATERIAL Polycarbonate with protective rubber overmold DIMENSIONS 103 x 58 x 30 mm (4.1 x 2.3 x 1.2 in) without pump, lithium-ion battery version 172 x 67 x 66 mm (6.8 x 2.6 x 2.6 in) with pump, lithium-ion battery version WEIGHT 182 g (6.4 oz) without Pump, lithium-ion battery version 380 g (13.4 oz) with Pump, lithium-ion battery version POWER SOURCE/RUN TIME Rechargeable slim extended lithium-ion battery (18 hours typical @ 20 ºC) without Pump Rechargeable lithium-ion battery (12 hours typical @ 20 ºC) without Pump Rechargeable extended-range lithium-ion battery (20 hours typical @ 20 ºC) without Pump (12 hours typical @ 20 ºC) with Pump Replaceable AAA alkaline battery (8 hours typical @ 20 ºC) without Pump (4 hours typical @ 20 ºC) with Pump ALARMS Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm) and vibrating alarm DISPLAY/READOUT Backlit liquid crystal display (LCD) TEMPERATURE RANGE -20 °C to 50 °C (-4 °F to 122 °F) *** HUMIDITY RANGE 15% to 95% Non-condensing (continuous) SENSORS Combustible gases/methane – Catalytic Bead O2, CO, CO/H2 low, H2S, NO2, SO2 – Electrochemical MEASURING RANGES Combustible Gases: 0-100% LEL in 1% increments Methane (CH4): 0-5% of vol in 0.01% increments Oxygen (O2): 0-30% of vol in 0.1% increments Carbon Monoxide (CO/H2 low): 0-1,000 ppm in 1 ppm increments Carbon Monoxide (CO): 0-1,000 ppm in 1 ppm increments Hydrogen Sulfide (H2S): 0-500 ppm in 0.1 ppm increments Nitrogen Dioxide (NO2): 0-150 ppm in 0.1 ppm increments Sulfur Dioxide (SO2): 0-150 ppm in 0.1 ppm increments CERTIFICATIONS INGRESS PROTECTION IP66/67 ANZEx: Ex ia s Zone 0 I/IIC T4 ATEX: Ex ia IIC T4 Ga and Ex ia I Ma; Equipment Group and Category II 1G/I M1 China CMC: Metrology approval China CPC: CPA 2017-C103 China Ex: Ex ia IIC T4 Ga; Ex ia d I Mb China KA: Approved for Underground Mines with CO, H2S, O2 and CH4 China MA: Approved for Underground Mines with CO, H2S, O2 and CH4 (Note: Diffusion 17144453 pack only) CSA: Cl I, Div 1, G A-D, T4; Ex d ia IIC T4 EAC: PB Ex d ia I X/1Ex d ia IIC T4 X IECEx: Ex ia IIC T4 Ga INMETRO: Ex ia IIC T4 Ga KC: Ex d ia IIC T4 KIMM: Ex d ia IIC T4 MSHA: 30 CFR Part 22; Permissible for underground mines; Li-ion PA-DEP: BFE 46-12 Permissible for PA Bituminous Underground Mines; Charger/docking station accessories; Category 1 SANS: SANS 1515-1; Type A; Ex ia I/IIC T4; Li-ion TIIS: Ex ia IIC T4 X UL: Cl I, Div 1, Groups A-D, T4; Zone 0, AEx ia IIC T4; Cl II, Gr F-G (Carbonaceous and Grain dust) SUPPLIED WITH MONITOR Calibration Cup (without pump), Sample Tubing (with pump), Reference Guide
